Starlink moved off the front soffit of a Grade II listed building, onto a cut-down aerial pole with an inch-and-a-half alloy mast, and into a server room on the 200 Mbps plan
A household that had just moved into a Grade II listed barn needed a professional Starlink installation. A generation two Starlink had already been transferred over to them, but wasn't working properly, so the customer was advised to contact Starlink, who sent out a new kit as a replacement. The existing install was fitted up on a soffit board, which was the first thing you see when you approach the building, so the recommendation was to take it down and put the dish out of sight. At the back of the barn, the existing aerial pole was cut down — the aerial is still in use, and cutting the pole will not affect the signal — and the replacement Starlink was fitted on that alloy inch-and-a-half mast. The cable was fed into a little server room behind the wall, so there was no need for a 40 metre cable. It's nice and neat, with no unsightly Starlink on the front of the property. The 200 Mbps plan covers the whole house without any hassle, just off the one router.
This is how the job looked as a trusted PLEO installer network install: the old dish taken off the front soffit of a Grade II listed building, a replacement Starlink on a cut-down aerial pole with an inch-and-a-half alloy mast at the back of the barn, a short run into a server room behind the wall, and the 200 Mbps plan throughout the house from one router. On a listed building, moving the dish off the front elevation is often the neater, more considerate finish, and a well-placed router can be enough to cover the whole house.
Why the dish came off the front soffit
The household had just moved in, and a generation two Starlink had already been transferred over to them, but wasn't working properly. Starlink sent out a new kit as a replacement. The existing install was fitted up on a soffit board, which was the first thing you see when you approach the building. That is a poor visual fit on a Grade II listed barn, so the recommendation was to take it down and put the dish out of sight at the back.

A cut-down aerial pole, and an inch-and-a-half alloy mast
At the back of the barn there was already an aerial pole, and the aerial is still in use. The pole was cut down, which will not affect the aerial signal, and the replacement Starlink was fitted on that alloy inch-and-a-half mast, sharing the pole with the aerial. The cable was then fed into a little server room behind the wall, so there was no need for a 40 metre cable. The 200 Mbps plan covers the whole house without any hassle, just off the one router.
Practical points for a similar house:
On a Grade II listed building, avoid leaving a dish on the front soffit or bargeboard, where it is the first thing you see when you approach. A mount at the back, out of sight, is a much neater finish.
If an existing aerial pole can take the dish, cutting the pole down (without affecting the aerial signal) is often cleaner than adding a second mast.
An inch-and-a-half alloy mast is a solid, tidy share with an aerial that is still in use.
Feed the cable into a nearby indoor space — in this case a little server room behind the wall — so you are not running a long 40 metre cable around the building.
On a house that can be covered from one well-placed router, the 200 Mbps plan can be enough throughout the building without a second access point.

Into the server room, and 200 Mbps from one router
With the replacement Starlink on the cut-down aerial pole, the inch-and-a-half alloy mast, the cable into the server room behind the wall, and the 200 Mbps plan, there was enough coverage for the whole house from the one router, without any hassle. That is the straightforward way to do this kind of replacement job on a listed building: take the unsightly dish off the front, use a tidy shared mast at the back, keep the cable run short, and match the plan to how the household actually uses the connection.
Professional Starlink installation
Space Internet Solutions fits Starlink for homes and businesses across the UK through our trusted PLEO (Professional Low Earth Orbit) installer network: survey, mounting, cable routing, Wi-Fi checks and the finish that leaves you with a working connection.
If you need a professional Starlink installation, feel free to get in touch with us at spaceinternetsolutions.com.



Comments