Starlink Mini as a BT fibre failover: a galvanised bracket, an alloy mast and a cellar cable run routed as requested

A home needed a professional Starlink Mini installation as a backup, after a BT fibre line with known faults that have not been remedied. The customer needs a permanent connection for his job and cannot afford to be offline, so he opted for the Mini. The Mini was fitted on a galvanised bracket and an alloy mast, and a separate Ethernet cable was run down into the cellar.

This is how the job looked as a trusted PLEO installer network install: a solid outdoor Mini mount, a tidy separate Ethernet run into the cellar, and a cable route that follows the customer's requirements exactly, because the old BT fibre is coming out and the new feed will be laid next to the run we put in. The result is a 100 Mbps connection he can use without having to rely on the BT line.

Why the cable was routed exactly as the customer asked

A failover Mini only works as a dependable backup if the mount is proper outdoor kit and the indoor path is done properly too. A galvanised bracket and an alloy mast hold a firm aim and a tidy finish. The cable side mattered just as much on this job. The customer was particular about the route, and for a good reason: the old BT fibre is being replaced, and the new feed will run alongside the Starlink Ethernet we installed. That is why the cable was routed to the customer's request, rather than taking a shortcut that would get in the way later. We go along with the customer's requirements.

Practical mounting points for any similar home:

• Use a galvanised bracket and a proper alloy mast rather than a light domestic clamp, so the Mini stays firmly aimed when it is doing failover duty.

• Run a separate Ethernet cable on a clean, clipped path into a convenient indoor point. Here, that was the cellar.

• If existing fibre is due to come out and be replaced, route the new Starlink cable exactly as the customer asks, so the replacement feed can be laid alongside it.

Into the cellar, and a 100 Mbps connection he can depend on

The separate Ethernet cable was clipped along the base of the wall and taken into the cellar, next to the existing Openreach box, on the path the customer asked for. Because the old BT fibre is coming out and being replaced, the new feed can now be laid alongside the run we put in. After the install he has a 100 Mbps connection, so he does not have to wait on the BT line or rely on it. A straightforward, solid result: a Mini on a galvanised bracket and alloy mast, a tidy cellar run routed as requested, and a backup connection that is there when he needs it.

Professional Starlink installation

Space Internet Solutions fits Starlink for homes and businesses across the UK through our trusted PLEO (Professional Low Earth Orbit) installer network: survey, mounting, cable routing, Wi-Fi checks and the finish that leaves you with a working connection.

If you need a professional Starlink installation, feel free to get in touch with us at spaceinternetsolutions.com.