top of page

Starlink Mini on an inch-and-a-half alloy mast: a small galvanised bracket on the gable, hardwired into the lounge, and the 100 Mbps plan throughout the house

3 days ago
3 min read

A household that had just moved into a beautiful, very remote location, surrounded by woods, needed a professional Starlink installation. A Mini was all they needed for the house, so a Starlink Mini was fitted on a small galvanised bracket on the gable end, with an inch-and-a-half alloy mast. The cable was hardwired into the main lounge, which covers the whole house — it isn't overly large. Everything was configured and set up, and the customer was happy on the 100 Mbps plan.

This is how the job looked as a trusted PLEO installer network install: a compact outdoor Mini mount on a small galvanised bracket on the gable, with an inch-and-a-half alloy mast, a tidy hardwired run into the main lounge, and the 100 Mbps plan throughout a house that is not overly large. On a modest-sized house, a Mini is often all you need. It is a neater fit than a larger dish, and the 100 Mbps plan is a good match when the built-in lounge coverage can reach the whole building.

Why a Starlink Mini on the 100 Mbps plan

The household had just moved into a beautiful, very remote location, surrounded by woods. A larger dish was not needed: a Mini was all they needed for the house. They went for the Starlink Mini on the 100 Mbps plan. The cable was hardwired into the main lounge, which covers the whole house — it isn't overly large. That is a clean, compact setup for a modest-sized house in a remote woodland setting.

Starlink Mini fitted on a small galvanised bracket on the gable end of a sandstone house, with an inch-and-a-half alloy mast, and woodland behind

A small galvanised bracket, and an inch-and-a-half alloy mast

The Mini was fitted on a small galvanised bracket on the gable end, with an inch-and-a-half alloy mast. That is a tidy, compact mount at the peak of a sandstone gable, clear of the roofline, and a good visual fit when a household does not need a larger dish. The cable was then hardwired into the main lounge. There was enough coverage from there for the whole house, so no extra indoor network was needed.

Practical points for a similar house:

  • A Mini on a small galvanised bracket with an inch-and-a-half alloy mast is a neat finish on a gable, and is often a better visual fit than a larger dish when a household does not need the extra capacity.

  • On a remote woodland plot, raise the Mini to the gable peak so the view of the sky is as clear as possible above the trees.

  • Hardwire the cable into the main lounge, so the indoor start of the run is in the room the household actually uses.

  • On a house that is not overly large, a well-placed Mini and the 100 Mbps plan can be enough to cover the whole building from a single lounge router, without a second access point.

A closer view of a Starlink Mini on an inch-and-a-half alloy mast at the peak of a sandstone gable, with the cable run down the wall

Hardwired into the lounge, and 100 Mbps throughout the house

With the Mini on an inch-and-a-half alloy mast, the small galvanised bracket on the gable end, the cable hardwired into the main lounge, and the 100 Mbps plan, there was enough coverage for the whole house. Everything was configured and set up, and the customer was happy. That is the straightforward way to do this kind of Mini job: a neat outdoor mount, a tidy hardwired run into the right room, and a plan that matches how the household actually uses the connection.

Professional Starlink installation

Space Internet Solutions fits Starlink for homes and businesses across the UK through our trusted PLEO (Professional Low Earth Orbit) installer network: survey, mounting, cable routing, Wi-Fi checks and the finish that leaves you with a working connection.

If you need a professional Starlink installation, feel free to get in touch with us at spaceinternetsolutions.com.

 
 
 

Comments


Post: Blog2_Post
bottom of page