Starlink on a two-inch alloy mast: a galvanised bracket on a barn conversion, cable into the office, and close to 200 Mbps
A pretty remote barn conversion on a copper BT line of about 5 Mbps, which just didn't work, needed a professional Starlink installation. The customer went for the 200 Mbps plan because his son does a bit of gaming, to make sure it would work and for future-proofing. A standard Starlink dish was fitted on a galvanised bracket, with a two-inch alloy mast and one of our alloy pole adapters. It was a straightforward install, with the cable fed into his office. They already had some networking and TP-Link hardwired mesh nodes around the property, and now he's getting close to 200 Mbps.
This is how the job looked as a trusted PLEO installer network install: a standard Starlink dish on a galvanised bracket at the gable, with a two-inch alloy mast and an alloy pole adapter, a tidy cable run into the office, and the household's existing TP-Link hardwired mesh already in place around the property. For a barn conversion coming off a copper BT line of about 5 Mbps, the 200 Mbps plan is a well-matched, future-proofed fit, and the connection is now close to 200 Mbps.
Why the 200 Mbps plan
The property had been on a copper BT line of about 5 Mbps, which just didn't work. The customer went for the 200 Mbps plan because his son does a bit of gaming, to make sure it would work and for future-proofing. The cable was fed into his office, and they already had some networking and TP-Link hardwired mesh nodes around the property. That is a clean, practical setup for a barn conversion that needed a professional install and a plan with enough headroom.

A galvanised bracket, a two-inch alloy mast, and an alloy pole adapter
The standard Starlink dish was fitted on a galvanised bracket, with a two-inch alloy mast and one of our alloy pole adapters. That is a tidy, secure mount at the gable, sitting above an existing TV satellite dish, and a good fit for a barn conversion that needed a straightforward professional install. The cable was then fed into the office. They already had some networking and TP-Link hardwired mesh nodes around the property, and the connection is now close to 200 Mbps.
Practical points for a similar property:
A galvanised bracket with a two-inch alloy mast and an alloy pole adapter is a secure, tidy finish on a gable, and sits comfortably alongside an existing TV dish when the sky view is clear.
Feed the cable into the office, so the indoor start of the run is in the room the household actually uses.
Where a property already has hardwired mesh nodes, a professional install can leave that indoor network in place and simply deliver a reliable feed to it.
The 200 Mbps plan is a good match when the household wants enough headroom for a bit of gaming and for future-proofing, especially when they are coming off a copper BT line of about 5 Mbps that just didn't work.

Cable into the office, and close to 200 Mbps
With the standard Starlink dish on a two-inch alloy mast, the galvanised bracket and alloy pole adapter at the gable, the cable fed into the office, and the 200 Mbps plan, the household's existing TP-Link hardwired mesh nodes were already in place around the property, and the connection is now close to 200 Mbps. That is the straightforward way to do this kind of job: a neat outdoor mount, a tidy cable run into the right room, and a plan that matches how the household actually uses the connection.
Professional Starlink installation
Space Internet Solutions fits Starlink for homes and businesses across the UK through our trusted PLEO (Professional Low Earth Orbit) installer network: survey, mounting, cable routing, Wi-Fi checks and the finish that leaves you with a working connection.
If you need a professional Starlink installation, feel free to get in touch with us at spaceinternetsolutions.com.



Comments