top of page

Starlink Mini on an inch-and-a-half alloy mast: a galvanised bracket, Residential 100 Mbps, and Wi-Fi calling where the phones had no signal

22 hours ago
3 min read

A household that had just moved in needed a professional Starlink installation. The old BT line was poor and nothing was promised, so the customer didn't sign up with them. There is no decent mobile reception where she lives, so they opted for Starlink. They're on a Starlink Mini with the Residential 100 Mbps plan, which is sufficient for what they need. The Mini was fitted on a galvanised bracket with an inch-and-a-half alloy mast, and the cable was fed in with a made-up Ethernet cable, plugged into the Mini router inside, so there is Wi-Fi outside and inside on the same network. A check on an iPhone over 5 GHz Wi-Fi showed 105 Mbps down, 18 Mbps up and 20 ms. Mobile coverage doesn't work even outside, so Wi-Fi calling, which is supported over Starlink, takes care of the phone problem.

This is how the job looked as a trusted PLEO installer network install: a Starlink Mini on a galvanised bracket with an inch-and-a-half alloy mast, a made-up Ethernet cable into the Mini router inside, Wi-Fi outside and inside on the same network, and the Residential 100 Mbps plan. Where the phones have no mobile coverage, even outdoors, Wi-Fi calling over Starlink is what lets them be used — it does not create a mobile signal of its own.

Why a Starlink Mini, and the Residential 100 Mbps plan

The household had just moved in. The old BT line was poor and nothing was promised, so the customer didn't sign up with them. There is no decent mobile reception at the property, which ruled out relying on a phone signal for day-to-day internet or calls. They opted for Starlink, on a Starlink Mini with the Residential 100 Mbps plan, which is sufficient for what they need. A later check on an iPhone over 5 GHz Wi-Fi showed 105 Mbps down, 18 Mbps up and 20 ms.

A Starlink Mini fitted on a galvanised wall bracket with an inch-and-a-half alloy mast, on a brick gable below the gutter, with the dish clearing the tiled roofline

A galvanised bracket, an inch-and-a-half alloy mast, and one network inside and out

The Mini was fitted on a galvanised bracket with an inch-and-a-half alloy mast, on the brick gable, so the dish clears the roofline. The cable was then fed in with a made-up Ethernet cable and plugged into the Mini router inside. That gives Wi-Fi outside and inside, all on the same network, rather than two separate wireless setups.

Practical points for a similar house:

  • A galvanised wall bracket on the brick, with an alloy mast, is a tidy, secure way to get a Mini up above the roofline.

  • A made-up Ethernet cable, run to the Mini router inside, keeps the indoor end of the job simple and puts the router where the household will actually use it.

  • Plugging that cable into the Mini router, rather than building a second network, means the Wi-Fi outside and the Wi-Fi inside are on the same network.

  • On a property with no decent mobile reception, even outdoors, Wi-Fi calling over Starlink is what lets the phones still be used. It is not a substitute for a mobile signal of its own.

  • The Residential 100 Mbps plan was a sufficient match for this household; a check over 5 GHz Wi-Fi later showed 105 Mbps down, 18 Mbps up and 20 ms.

A speed check on an iPhone over 5 GHz Wi-Fi, showing 105 Mbps down, 18 Mbps up and 20 ms

105 Mbps on Residential 100 Mbps, and Wi-Fi calling for the phones

With the Mini on a galvanised bracket and an inch-and-a-half alloy mast, the made-up Ethernet cable into the Mini router inside, and the Residential 100 Mbps plan, the household has Wi-Fi outside and inside on the same network. A check on an iPhone over 5 GHz Wi-Fi showed 105 Mbps down, 18 Mbps up and 20 ms. Mobile coverage doesn't work even outside, so Wi-Fi calling, which is supported over Starlink, takes care of the phone problem. That is the straightforward way to do this kind of job: a secure outdoor mount, a tidy cable route into the Mini router, one wireless network throughout, and a plan that matches how the household actually uses the connection — including the phones, where there is no mobile signal to fall back on.

Professional Starlink installation

Space Internet Solutions fits Starlink for homes and businesses across the UK through our trusted PLEO (Professional Low Earth Orbit) installer network: survey, mounting, cable routing, Wi-Fi checks and the finish that leaves you with a working connection.

If you need a professional Starlink installation, feel free to get in touch with us at spaceinternetsolutions.com. For this area, see our local installation page.

 
 
 

Comments


Post: Blog2_Post
bottom of page