Starlink Mini on an inch-and-a-half mast: two Mini routers hardwired on Cat6, and the 100 Mbps plan throughout the building
A home on a BT copper line needed a professional Starlink installation. The copper line gave a normal 5 to 10 Mbps, and dropped much lower at busy peak times. There are no gamers in the house, so they opted for a Starlink Mini on the 100 Mbps plan. The Mini was fitted on a galvanised bracket with an inch-and-a-half mast. The cable was run down the wall, with Ethernet into the same room and into the Mini router. From the back of that Mini router, another hardwired Cat6 was run to the other side of the house, into a spare secondary Mini router, so everything is hardwired together into a good network. The 100 Mbps plan now reaches the whole building.
This is how the job looked as a trusted PLEO installer network install: a compact outdoor Mini mount on a galvanised bracket with an inch-and-a-half mast, a tidy cable run down the wall, and two Mini routers hardwired together on Cat6, so the 100 Mbps plan is available throughout the building. On a house with no gamers, a Mini is often all you need. It is a neater fit than a larger dish, and the 100 Mbps plan is the right match when the old copper line was only 5 to 10 Mbps, and dropped much lower at peak times.
Why a Starlink Mini on the 100 Mbps plan
The household had been on a BT copper line that gave a normal 5 to 10 Mbps, and dropped much lower at busy peak times. There are no gamers in the house, so a larger dish was not needed. They opted for the Starlink Mini on the 100 Mbps plan, which now reaches the whole building. That is a clean step up from a copper line that was only holding 5 to 10 Mbps on a good day, and falling away when the line was busy.

An inch-and-a-half mast, and two Mini routers hardwired on Cat6
The Mini was fitted on a galvanised bracket with an inch-and-a-half mast, which is a tidy, compact mount at the top of a brick gable. The cable was then run down the wall, and Ethernet was taken into the same room and into the Mini router. From the back of that Mini router, another hardwired Cat6 was run to the other side of the house, into a spare secondary Mini router. That is what ties the two ends of the house together: everything is hardwired, rather than asking a single router to cover the whole building on its own.
Practical points for a similar house:
A Mini on a galvanised bracket with an inch-and-a-half mast is a neat finish on a gable, and is often a better visual fit than a larger dish when a household does not need the extra capacity.
Run the cable neatly down the wall and bring Ethernet into the same room as the Mini router, so the indoor start of the run is solid.
If the house is long enough that one router will not comfortably cover it, hardwire a second Mini router on Cat6 to the other side of the house, so both ends of the building share a wired backbone.

A hardwired pair of Mini routers, and 100 Mbps throughout the building
With the Mini on an inch-and-a-half mast, the cable run down the wall, Ethernet into the Mini router in the same room, and a second Mini router hardwired on Cat6 to the other side of the house, the 100 Mbps plan now reaches the whole building. That is the straightforward way to do this kind of Mini job: a neat outdoor mount, a tidy cable route, and a wired path between the two routers rather than hoping Wi-Fi will do all of the work.
Professional Starlink installation
Space Internet Solutions fits Starlink for homes and businesses across the UK through our trusted PLEO (Professional Low Earth Orbit) installer network: survey, mounting, cable routing, Wi-Fi checks and the finish that leaves you with a working connection.
If you need a professional Starlink installation, feel free to get in touch with us at spaceinternetsolutions.com.




Comments