top of page

Starlink on a two-inch alloy mast: an 18 by 12 galvanised bracket, the 200 Mbps mid plan, and 167 Mbps over Wi-Fi

19 hours ago
3 min read

A home on a BT line needed a professional Starlink installation. The line gave 20 Mbps, not the best, and often dropped to about 10 Mbps or below at night. That was no good with a son on the PlayStation and the family streaming Netflix, so they needed something more robust. They went for the 200 Mbps mid plan with 30% off on Starlink's November offer. The dish was fitted on an 18 by 12 galvanised bracket, on the brick rather than the fascia, with a two-inch alloy mast and one of our alloy pole adapters, so the mount is nice and secure. The cable was fed down into the living room, where the PlayStation is, and there was enough coverage for the whole house. It isn't a big house, so the 200 Mbps plan does it. A check on an iPhone over 5 GHz Wi-Fi showed 167 Mbps down, 12 Mbps up and 25 ms, and the customer was happy.

This is how the job looked as a trusted PLEO installer network install: a secure outdoor mount on an 18 by 12 galvanised bracket, fixed to the brick rather than the fascia, with a two-inch alloy mast and an alloy pole adapter, a cable run down into the living room, and the 200 Mbps mid plan throughout the house. On a house that is not a large one, that plan is a clean step up from a BT line that was only holding 20 Mbps, and falling to 10 or below at night.

Why the 200 Mbps mid plan

The household had been on a BT line that gave 20 Mbps, not the best, and often dropped to about 10 Mbps or below at night. That was no good with a son on the PlayStation and the family streaming Netflix. They needed something more robust, and went for the 200 Mbps mid plan with 30% off on Starlink's November offer. It isn't a big house, so that plan is a good match, and a check on an iPhone over 5 GHz Wi-Fi later showed 167 Mbps down, 12 Mbps up and 25 ms.

Starlink dish fitted on an 18 by 12 galvanised bracket, on the brick rather than the fascia, with a two-inch alloy mast and an alloy pole adapter

An 18 by 12 galvanised bracket, and a two-inch alloy mast

The dish was fitted on an 18 by 12 galvanised bracket, on the brick rather than the fascia, with a two-inch alloy mast and one of our alloy pole adapters. That is a secure, tidy mount: the bracket is on the masonry, the mast is a full two inches, and the adapter is alloy rather than plastic. The cable was then fed down into the living room, where the PlayStation is. There was enough coverage for the whole house, so no extra indoor network was needed.

Practical points for a similar house:

  • An 18 by 12 galvanised bracket on the brick, rather than on the fascia, is a solid fix for a two-inch alloy mast, and it leaves the fascia untouched.

  • Use an alloy pole adapter, not a plastic one, so the head of the mast stays rigid.

  • Feed the cable down into the room where the household actually uses the connection — in this case the living room, with the PlayStation — so the indoor start of the run is in the right place.

  • On a house that is not a large one, a well-placed dish and the 200 Mbps mid plan can be enough to cover the whole building without a second access point.

A speed check on an iPhone over 5 GHz Wi-Fi, showing 167 Mbps down, 12 Mbps up and 25 ms

167 Mbps on the 200 Mbps mid plan, and coverage throughout the house

With the dish on a two-inch alloy mast, the 18 by 12 galvanised bracket on the brick, the cable fed into the living room, and the 200 Mbps mid plan, there was enough coverage for the whole house. A check on an iPhone over 5 GHz Wi-Fi showed 167 Mbps down, 12 Mbps up and 25 ms, and the customer was happy. That is the straightforward way to do this kind of job: a secure outdoor mount, a tidy cable route into the right room, and a plan that matches how the household actually uses the connection.

Professional Starlink installation

Space Internet Solutions fits Starlink for homes and businesses across the UK through our trusted PLEO (Professional Low Earth Orbit) installer network: survey, mounting, cable routing, Wi-Fi checks and the finish that leaves you with a working connection.

If you need a professional Starlink installation, feel free to get in touch with us at spaceinternetsolutions.com.

 
 
 

Comments


Post: Blog2_Post
bottom of page