top of page

60GHz wireless bridges in a supply gap: discontinued kits, early-2027 successors and how to plan an outbuilding link now

2 days ago
6 min read

A wireless bridge is often the quiet hero of a satellite broadband installation. The dish sits on the house, but the office, workshop, stable block or holiday cottage is across a yard or a field, and digging a trench for a cable is expensive or simply not possible. A pair of point-to-point radios carries the connection across instead.

For short hops, 60GHz bridges have become a popular choice because they offer very high capacity and suffer little interference. This autumn, though, the 60GHz market has had an awkward few weeks. One of the best-known budget makers has stopped producing several kits before their replacements are on sale, a major planning tool has changed hands and names, and Ubiquiti has released new firmware for its high-end Building Bridge. Here is what has happened and what it means if you are planning, extending or maintaining a link.

What has changed at MikroTik?

MikroTik's 60GHz range has been a favourite for garden offices and outbuildings because its Wireless Wire kits arrive as two pre-paired radios: point them at each other, power them up and they form an encrypted link. MikroTik's own website now marks the Wireless Wire nRAY, the original Wireless Wire Cube and the LHG 60G as discontinued.

Distributors have also been told that the Wireless Wire Cube Pro, the 802.11ay kit with automatic 5GHz backup, is no longer being made. A MikroTik distributor update published on 5 November lists it as discontinued, with the suggested replacement being a new kit called Wireless Wire LRAY, which is expected in the first quarter of 2027. MikroTik's product page still lists the Cube Pro at the time of writing, and posts on MikroTik's community forum from late October and November describe resellers telling customers that their remaining units are the last.

The LRAY is the paired version of a second-generation nRAY that MikroTik first showed at the Mobile World Congress trade show in March. It pairs a 60GHz 802.11ad link with a Wi-Fi 6 radio on 5GHz as a fallback, adds a 2.5 gigabit Ethernet port and an SFP port, includes satellite positioning and runs RouterOS 7. MikroTik claims links of up to 10km. Distributors are clear that the first quarter of 2027 is an expected window rather than a delivery date, and that the stated range depends on line of sight, alignment and weather.

The result is a gap of several months in which some of the most affordable plug-and-play 60GHz kits are hard to find.

Cambium's planning tool is now Airspan LINKPlanner

The second change affects how links are designed. Cambium Networks was split between two buyers this autumn, and its fixed wireless products, including the cnWave 60GHz range, moved to Airspan. On 6 November LINKPlanner, the free online tool many installers use to model radio paths, was updated to version 7.0.0 and rebranded as Airspan LINKPlanner on a new web address. The old Cambium address stopped working on 9 November.

In the new version cnWave 60GHz products are called Wave 60GHz, and more of the range can be planned as mesh network devices, so a link drawn as a simple point-to-point hop can be converted into part of a wider 60GHz mesh. Cambium's ePMP radios, which stayed with Cambium rather than moving to Airspan, have been removed from the tool. Airspan advises exporting older projects containing ePMP equipment before opening them, to keep the original equipment list.

New firmware for Ubiquiti's Building Bridge XG

Ubiquiti, meanwhile, has rolled out UniFi Building Bridge XG firmware 2.2.1. Its main change is revoking compromised eMudhra certificate authority certificates, part of the same certificate clean-up we covered for other bridges earlier this month. The release notes carry a known issue: updates from version 1.2.0 or older may fail, and Ubiquiti advises caching the firmware in the UniFi Network application before updating. One user on Ubiquiti's community forum has also reported that the far side of their link became unreachable after updating. That is a single report rather than an acknowledged fault, but it is a reminder to update bridges with care.

Why 60GHz is worth the trouble

None of this makes 60GHz a bad choice. Its beam is very narrow and the band is wide, so a well-aligned link can carry gigabit-class traffic with little risk of neighbouring Wi-Fi or other links getting in the way. That makes it ideal for a garden office, a second building on a business site or a barn a few hundred metres away.

Its weakness is weather. Heavy rain absorbs 60GHz signals far more than lower frequencies, which is why the better kits include a 5GHz backup radio that keeps traffic flowing when the main link fades. The distances quoted by manufacturers are best-case figures. For a typical property, a shorter hop with a strong signal margin is far more reliable than a long one at the edge of the specification.

What this means for UK homes and businesses

If you already have a 60GHz link that is working well, there is no need to change anything. A discontinued product is one that is no longer made, not one that stops working, and MikroTik says its devices include software updates for the life of the product or a minimum of five years from purchase. The practical points are about planning ahead:

  • Keep a record of exactly which model is fitted at each end, and save a configuration backup. If a unit fails, an installer can restore the link far faster with that information.

  • Do not assume a new model will pair with an old one. Replacing a single end with a different generation may not work, so budget for a matched pair if one radio fails.

  • If you rely on the link for work, consider a spare. For a business or a remote office, a boxed spare kit costs far less than days without a connection while stock is short.

  • Plan new links around what is actually available. Ubiquiti's UniFi Building Bridge offers 60GHz with 5GHz backup and is rated for up to 500m, with 200m to 300m recommended for best results, while 5GHz and 6GHz kits such as TP-Link's Omada Beam Bridge range suit longer or partly obstructed paths.

  • Do not book an installation around an expected launch quarter. If your project cannot wait for early 2027, choose a kit that is in stock and supported today.

  • Update bridge firmware deliberately. Check the release notes, follow any caching or staged-update advice, update the far end first where the manufacturer recommends it, and have a way to reach both radios if something goes wrong.

It also helps to remember what a bridge is for. Whether your connection comes from Starlink today or Amazon Leo once it reaches customers, the satellite service is only as good as the network that carries it around your property. A link that drops in a downpour or a bridge that cannot be repaired quickly will feel like a broadband fault, even when the dish is working perfectly.

Professional installation makes the link last

A good point-to-point link starts long before the radios go up. It needs a survey of the path, a check for trees and buildings in the beam, the right frequency for the distance, rigid mounts that will not twist in the wind, outdoor-rated cabling with proper power and surge protection, and careful alignment. It also needs someone who knows which equipment is in stock, which models work together and how to keep firmware up to date safely.

That is what Space Internet Solutions and our PLEO (Professional Low Earth Orbit) installers do every day. We install Starlink, plan for Amazon Leo and design the wireless bridges, mesh and cabling that take a satellite connection to every building that needs it, with installers nationwide across the UK.

If you are planning a link to an outbuilding, or want an existing bridge checked before winter, visit spaceinternetsolutions.com and tell us about your property. We will recommend equipment that is available now and fit it properly first time.

Sources: MikroTik product pages for Wireless Wire nRAY, Wireless Wire Cube, LHG 60G and Wireless Wire Cube Pro; HellasCom, "MikroTik: 6 Discontinued Products and Their Suggested Replacements" and "MikroTik nRAY gen2" (5 November 2026); MikroTik community forum, "60Ghz End Of Life products" (October to November 2026); Airspan, "LINKPlanner v7.0.0 Now Released" (6 November 2026); Ubiquiti, UniFi Building Bridge XG 2.2.1 release notes (November 2026).

 
 
 

Comments


Post: Blog2_Post
bottom of page